Voice Internetworking Experts


Post New Topic  Post A Reply
my profile | register | search | faq | forum home
  next oldest topic   next newest topic
» Voice Internetworking Experts   » Cisco CCIE Voice Discussion Forums   » CCIE Voice Lab   » CME SIP Softphone no DN

UBBFriend: Email this page to someone!    
Author Topic: CME SIP Softphone no DN
Pito Chueco
Jr Member

Member # 28213

Rate Member
posted November 04, 2010 06:03 AM      Profile for Pito Chueco     Send New Private Message      Edit/Delete Post  Reply With Quote 
I am setting up my home lab, and using x-lite softphone clients for the phones. All is well with SCCP, but I am having problems with the SIP phone.

The phone gets an IP address, gets the system message but it does not show the DN. I can see the phone show registered on the CME, and dial peers are created.

Any ideas?

Here is the config relevant to the phone:

voice register global
mode cme
source-address 177.3.11.1 port 5060
max-dn 10
max-pool 5
load 7941 SIP41.8-4-2S.loads
authenticate register
tftp-path flash:
create profile sync 0065240430300741
!
voice register dn 1
number 3002
name Br2Ph2
label Br2 3002
!
voice register template 1
softkeys connected Confrn Endcall Hold Trnsfer
!
voice register pool 1
id mac 0011.85C2.F0D2
type 7941
number 1 dn 1
username br2ph2 password cisco

Posts: 8 | From: USA | Registered: Mar 2009  |  IP: Logged


All times are Eastern Time  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic next oldest topic   next newest topic
Printer-friendly view of this topic
Hop To:


Contact Us | Voice Internetworking Experts